1. The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing
at high accuracy.
2. The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
3. The main spindle, shafts and gears in the headstock are made by high grade alloy steel, hardened and precision ground for high
speed running at lower noise level.
4. The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
5. The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
6. Both X & Z axes equipped with individual electronic handwheels on control panel for manual operation as conventional lathes.
7. Widely & semi-enclosed front chuck & chip guard equipped with interlock switches according to EC regulation provides safety and easy
8. Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean.
9. A designed openable door on rear splash guard provide for X-Axis and home switches maintenance and adjustment easily.
10. Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and mono-drives.
11. The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle
infinitely variable speed selection correctly.
12.Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system
performance for maintenance and trouble shooting easily .
1530ENC / 1550ENC
1825ENC / 1850ENC
Swing over Bed (mm/ inch)
Swing over Cross Slide (mm/ inch)
Swing in gap (mm/ inch)
Distance Between Centers (mm/ inch)
750 (30) / 1250 (50)
Gap width from faceplate (mm/ inch)
Spindle bore (mm/ inch)
Low range 13-392
Medium range 391-1135
High range 1136-3500
Spindle nose bush
MT6 x MT4
Quill travel (mm/ inch)
Quill diameter (mm/ inch)
Bed width (mm/ inch)
Max. longitudinal travel (mm/ inch)
420(16) / 920(36)
300(12) / 900(35)
Max. turning length (mm/ inch)
370(14) / 870(34)
X-Axis Ballscrew Dia.
20 x P5
Z-Axis Ballscrew Dia.
32 x P5
Overall length (mm/ inch)
2830(121) / 3330(131)
Overall width (mm/ inch)
Overall height (mm/ inch)
Net weight (Approx. kgs)
1500 / 1800
2000 / 2200
Gross weight (Approx. kgs)
2000 / 2300
*All specifications above are subject to change without notice.