What We Offer

What We Offer

2040ENC ~22120ENC

Model:2040ENC ~22120ENC
Name
E-mail
Company
Tel
Message
Please fill Code Change Code
         

Characteristics :

1. The rigid construction bed are induction hardened over HRC50 and precision ground provides heavy duty turning and fine finishing at high
    accuracy.
2. The main spindle is supported by selected and preloaded super precision bearings to ensure high accuracy through full speed ranges.
3. The main spindle, shafts and gears in the headstock are made by high grade alloy steel, hardened and precision ground for high
    speed running at lower noise level.
4. The automatic lubrication pump equipped on apron provides all slide-ways and two axes ballscrews lubricants continually.
5. The hardened and precision ground ballscrews for X & Z axes are mounted on high precision bearings to enable sensitive movement.
6. Both X & Z axes equipped with individual electronic handwheels on control panel for manual operation as conventional lathes.
7. Widely & semi-enclosed front chuck & chip guard equipped with interlock switches according to EC regulation provides safety and easy
    operation.
8. Full length rear splash guard and front moveable chip trolley provides chip and coolants safety and easy clean.
9. A designed openable door on rear splash guard provide for X-Axis and home switches maintenance and adjustment easily.
10. Both X & Z axes are equipped with selected controller whole package AC servo motors with its own power supply and mono-drives.
11. The EUCHNER automation sensor equipped on spindle speed changer to provide the exactly positions of speed range for spindle
      infinitely variable speed selection correctly.
12. Electric positional stops in X & Z axes and tailstock to avoid any over travels. The modular input/output card evidence all control system
      performance for maintenance and trouble shooting easily

Specification :

MODEL

2040/ 2060/ 2080/ 20120

2240/ 2260/ 2280/ 22120

CAPACITY

Swing over Bed (mm/ inch)

510(20)

560(22)

Swing over Cross Slide (mm/ inch)

340(13.5)

390(15.5)

Swing in gap (mm/ inch)

760(30)

810(32)

Distance Between Centers (mm/ inch)

1000(40)/1500(60)/2000(80)/3000(120)

Gap width from faceplate (mm/ inch)

230(9)

HEADSTOCK

Spindle nose

D1-8(A2-8)

Spindle bore (mm/ inch)

80(3.125)

Spindle Bearing

Front

32026

Rear

32021

Spindle speeds

Low range

26-266

Medium range

267-766

High range

767-2400

Spindle nose bush

MT7 x MT5

TAILSTOCK

Quill travel (mm/ inch)

200(8)

Quill diameter (mm/ inch)

75(3)

Quill taper

MT5

BED

Bed width (mm/ inch)

345(13)

Max. longitudinal travel (mm/ inch)

680(26.8)/1190(46.8)/1700(67)/2710(106.7)

Max. turning length (mm/ inch)

630(24.8)/1140(44.8)/1650(65)/2660(104.7)

BALLSCREW

X-Axis Ballscrew Dia.

25 x P5

Z-Axis Ballscrew Dia.

40 x P10

GENERAL INFORMATION

Overall length (mm/ inch)

2970(117)/3670(145)/4170(164)/5170(204)

Overall width (mm/ inch)

2100(83)

Overall height (mm/ inch)

2230(88)

Net weight (Approx. kgs)

2600/2800/3000/3800

2700/2900/3200/4000

Gross weight (Approx. kgs)

3200/3400/3600/4600

3500/3700/4000/4800

*All specifications above are subject to change without notice.